Our Products
Some Of Our Wonderful Products
.jpg)
APC Schneider SRV3KRIL UPS
*Key Specifications*
Technology: Online Double-Conversion .
Power Factor: 0.8.
Power Rating: 3000 VA / 2400 W.
Input Voltage: 230 V Nominal (Accepts wide ranges to tolerate fluctuating commercial power).
Output Waveform: Pure Sine Wave.
Batteries: No internal batteries. Relies entirely on the included horizontal External Battery Pack (72 V system using 6x or 12x 12V/9Ah batteries depending on regional pack variant).
Recharge Time: Approximately 5.5 Hours to 90% capacity due to the high-capacity external cells.
AC Outlets: 6x IEC 60320 C13 + 1x IEC 60320 C19.
Phase: Single-Phase Input and Single-Phase Output (1:1).
Dimensions (D×W×H): 632 mm × 437 mm × 86 mm (2U height).
Net Weight: 52 kg .
*Key Features*
4U Extended-Run Server Rack Footprint: Spreads the critical components horizontally over two separate 2U chassis (Power module + Battery module) to keep server rooms organized while heavily boosting backup capability.
High-Rate Internal Charger: Upgraded to 350W (compared to the standard model) to handle deep-cycle grid recharging across multiple connected battery arrays without overheating.
Scalable Runtime Expansion: Designed to endure long-term power grid dropouts by allowing you to stack and daisy-chain up to 4 additional rackmount external battery packs (SRV72RLBP-9A).
Double-Conversion Signal Cleaning: Continuously cleans voltage spikes, brownouts, and frequencies to output precise, laboratory-grade utility power to mission-critical hardware.
SmartSlot Integration: Provides an expansion slot to accommodate an optional Network Management Card (NMC), giving IT administrators full IP-based shutdown controls and SNMP monitoring capabilities.
Automatic System Bypass: Seamlessly diverts heavy overloads or internal component faults directly back to the grid line to prevent connected hardware from turning off.
Technology: Online Double-Conversion .
Power Factor: 0.8.
Power Rating: 3000 VA / 2400 W.
Input Voltage: 230 V Nominal (Accepts wide ranges to tolerate fluctuating commercial power).
Output Waveform: Pure Sine Wave.
Batteries: No internal batteries. Relies entirely on the included horizontal External Battery Pack (72 V system using 6x or 12x 12V/9Ah batteries depending on regional pack variant).
Recharge Time: Approximately 5.5 Hours to 90% capacity due to the high-capacity external cells.
AC Outlets: 6x IEC 60320 C13 + 1x IEC 60320 C19.
Phase: Single-Phase Input and Single-Phase Output (1:1).
Dimensions (D×W×H): 632 mm × 437 mm × 86 mm (2U height).
Net Weight: 52 kg .
*Key Features*
4U Extended-Run Server Rack Footprint: Spreads the critical components horizontally over two separate 2U chassis (Power module + Battery module) to keep server rooms organized while heavily boosting backup capability.
High-Rate Internal Charger: Upgraded to 350W (compared to the standard model) to handle deep-cycle grid recharging across multiple connected battery arrays without overheating.
Scalable Runtime Expansion: Designed to endure long-term power grid dropouts by allowing you to stack and daisy-chain up to 4 additional rackmount external battery packs (SRV72RLBP-9A).
Double-Conversion Signal Cleaning: Continuously cleans voltage spikes, brownouts, and frequencies to output precise, laboratory-grade utility power to mission-critical hardware.
SmartSlot Integration: Provides an expansion slot to accommodate an optional Network Management Card (NMC), giving IT administrators full IP-based shutdown controls and SNMP monitoring capabilities.
Automatic System Bypass: Seamlessly diverts heavy overloads or internal component faults directly back to the grid line to prevent connected hardware from turning off.
